1800-425-2383 | 94440 82770 | 94440 82750

Micro Concrete

Our Brochures

Adhere Micro Concrete.pdf
injection-grout

ADHERE - Micro Concrete

ADHERE Micro Concrete is a ready to use dry powder which requires only the addition of clean water at site to produce a free flowing non shrink repair micro concrete. It is composed of good quality cement, properly selected aggregates & additives. It is used & designed for repairing damaged reinforced concrete elements like columns, beams & structure where the areas are restricted or not easily accessible for proper placement of concrete using vibrator. ADHERE Micro Concrete has excellent flowability, workability & proper particle size to reach small & congested reinforcement.

ADHERE Micro Concrete meets the requirement of ASTM C 109: 99, ASTM C 307, BS 1881 Part 207

  • - Pumpable - Can be pumped or poured into restricted locations.
  • - Flowable-Flowable mortar hence does not require compaction.
  • - Shrinkage compensation- Controlled expansion system which compensates for Shrinkage and settlement in the plastic state.
  • - Strength - Develops high initial and ultimate compressive strength.
  • - Moisture resistant - Offers excellent resistance to moisture ingress.
  • - Durability - Makes repaired sections highly durable & compatible to parent concrete.
  • - Thickness build up - Can be applied at 100 mm thickness at one stroke
  • - Chloride content Contains no chloride based additive so prevents corrosion of reinforcement.
  • - Early reinstatement -Rapid strength gain helps in early reinstatement & removal of shuttering.
    • - Pour or pump the mixed Dr. Fixit Micro Concrete into a watertight shuttering.
    • - Cure the repaired concrete for minimum 7 days before removing the shuttering or alternatively use Dr. Fixit Curing Compound for curing.
    • - Use a PAN Mixer for mixing ADHERE Micro Concrete.
    • - Charge 85-90% of clean & potable mixing water (3.75 to 4 liters per 25 kg bag) to a PAN Mixer.
    • - Start addition of Micro Concrete powder slowly under continuous mixing. Keep mixing for 2 minutes. Add balance quantity 15-20% of mixing water & again mix for another 2-3 minutes to form a homogeneous, free flowing, uniform & lump-free mix.
    Note:

    Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.