1800-425-2383 | 94440 82770 | 94440 82750

Adhere Bonds 1K Nanoflex

Our Brochures

Adhere-Bonds-1K-Nanoflex.pdf
Adhere Bonds 1K Nanoflex

1K Nanoflex

Certified, Eco friendly, breathable,anti alkali and chlorine -resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of surfaces before laying tiles using adhesives, ideal for use in green building .single component with low CO2 emissions and very low volatile organic compound emissions, recyclable as an inert material at the end of its life.

ADHERE BONDS IK NANOFLEX develops a smooth creamy mixture paste consistency can b adjusted by varying the amount of water in order to achieve optimal work ability as per the particular site conditions.Guarantees maximum adhesion to the bonded system.

  • - Floors and walls, for internal and external use.
  • - Breathable
  • - Crack bridging ability even at low temperatures
  • - Specifically intended for laying using ADHERE BONDS Tile Adhesive No Limits
  • - Suitable for overlaying
  • - 30% better coverage than two component systems
  • - The Advance technology, makes it complete water repellent, Chemically stable and permanent elasticity

Terraces, balconies, horizontal surfaces and swimming pools on monolithic cement-based screeds, existing floors covered with ceramic/vitrified tiles and marble stone, dimensionally stable natural stone well-anchored to the surface and clean, cement-based plasters/renders and cementitious mortars, aged concrete.

On gypsum on metal or wood substrates, on bituminous sheeting, to waterproof exposed surfaces subject to foot traffic, on low-density screeds, on insulation layers on inverted roofs made with insulating panels or low-density materials, in swimming pools and tanks used to hold exposed water.

Preparation of substrates

  • - The surface must be perfectly cured and dry, solid (i.e. free of weak or easily removable parts) and free from oil, grease, paint and de-bonding agent. When working on weakened parts, when parts of the substrate are missing and also in the case of gravel beds, the substrate must be restored with suitable products. Correct uneven areas with suitable finishing products. On ceramic substrates all traces of surface treatments such as wax and oil must be removed. The most suitable cleaning methods are sandblasting, mechanical scarification or washing with detergents and jet washing. Before application damp absorbent surfaces without letting any stagnant water.
  • - Take due care to waterproof perimeter joints, expansion and Waterproofing tape joints using bonded with ADHERE BONDS Ik NANO FLEX
  • - Use the special pieces to waterproof external angles, internal angles and connections to drains. Any structural joints must first be waterproofed
Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.