Tile Adhesive

tile-adhesive

ADHERE BONDS – TOT

Excellent performance, highly polymer modified, high strength, flexible tile adhesive for fixing vitrified tiles and glass mosaics in interior and exterior situation. Suitable for walls and floors. is non-slip and water resistant.

  • - Suitable for indoor and tile on tile application.
  • - Excellent adhesion and low shrinkage.
  • - Curing not required.
  • - A floor can be used after 24 hours.
  • - Sufficiently flexible to accommodate physical and thermal movements.
  • - Ready to use. Need only water to be mixed.

Grouting should not be carried out for at least 24 hours. Use ADHERE BONDS-CTG (Cementitious grout) and ADHERE BONDS-ETG (Epoxy grout) for grouting.

ADHERE BONDS-TOT exceeds the requirements of BS. 5980: 1980 minimum (The United Kingdom) “Specification for adhesives for use with Ceramic Tiles and mosaics”.

Add clean water to ADHERE BONDS-TOT and mix thoroughly until a lump-free mortar is obtained. A 20 kg bag will require approximately 7 liters of water

Note:

Whilst any information and / or specification contained herein is to the best of our knowledge true and accurate, no warranty is given or implied in connection with any recommendation or suggestions made by us, our representatives, agents or distributors as the conditions of use of any labour involved are beyond our control.